Class II surge protective devices do offer protection against the secondary effects of an indirect lightning strike instead of the effects of a transient over voltage caused by a direct lightning strike, which are usually installed at the sub-distribution panel or electrical panel.
Application of AC Surge Protector
- Datacenter
- Radio communication
- Security Systems
- Industrial Installation
- Wind Turbine Installation
- Domestic Photovoltaic
- Industry Photovoltaic Solar Farms
- Energy storage systems
- Water Treatment
Product Parameter (Specification) of AC Surge Protector
Technical Data | |||||
SPD Type | Type 2;Class ll/B | ||||
AC system | TN/TT/ | ||||
Nominal voltage (a.c.) | Un | 220V | 300V | 380V | 400V |
Max. continuous operating voltage (a.c.) | Uc | 275V | 320V | 385V | 440V |
Nominal discharge current(8/20μs) | ln | 20kA | |||
Max.discharge current (8/20μs) | lmax | 40kA | |||
Protection level | Up | ≤1.5kV | ≤1.6kV | ≤1.8kV | ≤2.0kV |
Response time | tA | ≤25ns | |||
Temporary overvoltage (TOV) Charasteristics - 5 sec | UT | 580V | 580V | 580V | 580V |
Temporary overvoltage (TOV) Charasteristics - 120 mn | UT | 440V | 440V | 440V | 770V |
Admissible short-circuit current | Isccr | 10 kA | |||
Max. backup fuse | 125A gL/gG | ||||
Protection mode(s) | L/PE | ||||
Mechanical Data | |||||
Technology | MOV (Metal Oxide Varistors) | ||||
SPD configuration | Single Phase/ Three Phase | ||||
Plugable | Yes | ||||
Mounting | 35mm DIN rail | ||||
Housing material | Thermoplastic,UL94 V-0 | ||||
Operating temperature | -40℃...+80℃ | ||||
Protection rating | IP20 | ||||
Operating state / fault indication | Green / Red | ||||
Remote Signaling | Optional | ||||
Wiring for remote signaling | Max. 1.5mm solid/flexible | ||||
Max.Voltage / Current for remote signaling | 250V/0.1A; 125V/0.2A; 75V/0.5A | ||||
Standards compliance | IEC 61643-11 / EN 61643-11 | ||||
Certification | CE,RoHS,TUV | ||||
Dimensions (1 POLE) | |||||
Product Net Width | 18mm | ||||
Product Net Height | 90mm | ||||
Product Net Depth/Length | 60mm | ||||
Ordering Information | |||||
Minimum Order Quantity | 1 Piece | ||||
Shipping Port | Ningbo/Shanghai Port | ||||
Payment | L/C D/P D/A T/T (Negotiation Available) |
PACKING
FAQ
Q: Are you factory or trade company?
A: We are a factory that specializes in providing OEM and ODM services based on your requirements.
Q: What types of surge protectors do you offer?
A: We produce DC and AC SPD. Currently, we offer two types of DC SPDs: T1T2 and T2. The T1T2 type is suitable for the main distribution box of the PV system, while the T2 type is recommended for the distribution box of the home solar system.
Q: Which certification or standard do you have?
A: We have CE and RoHS TUV ISO90001 and related test reports that conform to IEC 61643-11 and national standard GB/T18802.1.
Q: How to control product quality?
A: We use high-quality materials from the chip to the copper part for all our accessories. Automatic production process and each step are carefully monitored to ensure quality. All products undergo machine testing to guarantee timely delivery and top-notch quality.
Q: About the MOV/Varistor
A: We offer the option to purchase the chip separately, allowing you to select a MOV with various currents and voltages.
Q: What's the payment term?
A: We accept T/T, L/C, D/P, WEST UNION, PAYPAL, CASH.